Search found 270 matches

by Torchie
Fri Oct 18, 2013 12:23 pm
Forum: Restoration
Topic: 1963 Sea Coaster Deluxe project
Replies: 77
Views: 156593

Re: 1963 Sea Coaster Deluxe project

Good for you. Where there's a will. There's a way.
Nice use of the coleman. I used a turkey fryer setup for mine.
Keep at it.
Karl.
by Torchie
Wed Oct 09, 2013 12:10 pm
Forum: Restoration
Topic: 1963 Sea Coaster Deluxe project
Replies: 77
Views: 156593

Re: 1963 Sea Coaster Deluxe project

Rull of thumb for steaming is one hour per inch of thickness. When I bent my ribs which were approx. a half inch thick I steamed then for 30 Minutes. Not knowing how much experience you have with this I will offer some unsolicited thoughts from my steaming experience. 1.DO NOT totaly block off the e...
by Torchie
Thu Sep 26, 2013 5:55 pm
Forum: Engines
Topic: Twin engine dash plate.
Replies: 4
Views: 16089

Re: Twin engine dash plate.

IMG_0218.JPG
IMG_0218.JPG (66.63 KiB) Viewed 16035 times
IMG_0214.JPG
IMG_0214.JPG (85.63 KiB) Viewed 16035 times
As promised.
Pics of the instaled Twin engine dash plate.
Turned out well considering all the old holes I had to deal with.
Karl.
by Torchie
Thu Sep 26, 2013 5:51 pm
Forum: Miscellaneous
Topic: Lubricate remote controls
Replies: 2
Views: 16490

Re: Lubricate remote controls

If you can remove the cable from the sheathing then lube is fairly easy :D What I did with mine was to extend the cable all the way out at the motor end and apply a liberal coating of 90 weight gear oil. Then I attached the end to the rafters and let gravity do it's thing. Also kept working the cont...
by Torchie
Thu Sep 26, 2013 2:19 pm
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

Good Jall.
I will be taking the doors off when I run the engines as i have heard too many
stories of them ending up at the bottom of the lake. :o
Karl.
by Torchie
Thu Sep 26, 2013 9:47 am
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

Nice.
And here I thought that I was the only one :D
You have been holding out on us Jall.
I sure you know that the pullcord doors are being recast and are available.
Getting ready to install my twin engine dash plate this evening.
One more thing off the list.
Karl
by Torchie
Thu Sep 19, 2013 5:59 pm
Forum: Engines
Topic: Twin engine dash plate.
Replies: 4
Views: 16089

Re: Twin engine dash plate.

Andreas.
Sent you a Scan of the dash plate paperwork.
Let me know if it will work for you.
Karl.
by Torchie
Thu Sep 19, 2013 1:33 pm
Forum: Engines
Topic: Twin engine dash plate.
Replies: 4
Views: 16089

Re: Twin engine dash plate.

PM me with a mailing address Andreas and I will certainly make a copy and send you one.
From the pic you can see some water damge to the instruction sheet but still very readable.
I look forward to hearing from you.
Torchie.
by Torchie
Thu Sep 19, 2013 9:56 am
Forum: Engines
Topic: Twin engine dash plate.
Replies: 4
Views: 16089

Twin engine dash plate.

IMG_0190.JPG
IMG_0190.JPG (66.31 KiB) Viewed 16089 times
IMG_0191.JPG
IMG_0191.JPG (79.81 KiB) Viewed 16089 times
Behold! The Dodo bird :)
NOS and it even has the wiring directions and the drilling template.
Now to put it on.
Torchie.
by Torchie
Sat Sep 14, 2013 2:33 pm
Forum: Restoration
Topic: Fixing newbie screw up?
Replies: 3
Views: 7676

Re: Fixing newbie screw up?

Not sure in regards to the construction on a 64 Thompson but did you have the dash as well as the deck supports out? As Andreas has said you should be able to pull it back into shape. These boats are like a cube. Quite solid and strong when all the sides (pieces) are in place. But remove one and the...
by Torchie
Sat Sep 14, 2013 2:26 pm
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

Well as of Monday I will have the 2nd rarest Twin engine dash plate in exsistence. Right behind Andreas. :D :D :D :D
Thanks to Joe B (for the reminder) I was able to get one via the AOMCI site. Same place I found my Javelin hoods.
Once it is installed I will post some pics.
Torchie.
by Torchie
Wed Sep 11, 2013 7:08 pm
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

Long time reader and first time poster! I am a Merc guy but I must say nothing looks as cool as a pair of Golden Javelins! Beautiful work and thanks for sharing!! Thanks for the compliments guys. Offshore, these are on the back of a 55 Offshore. Probably not all that different than the 57. Andreas ...
by Torchie
Tue Sep 10, 2013 3:29 pm
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

Good tip Joe. That site is where I came up with the Javelin hoods. I made contact with a guy who had a bunch of them. He most likely has some dash plates as well. Once we get a little farther away from summer I will give him a call. Up until seeing the pics of Andreas's I wasn't sure that they exsis...
by Torchie
Tue Sep 10, 2013 11:30 am
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

I have been looking Andreas but so far no luck. I think I will take one of the two plates that I have an see about cutting holes for the 2nd set of buttons.
I will let you know how it goes.
Torchie.
by Torchie
Tue Sep 10, 2013 7:40 am
Forum: Engines
Topic: The twins are onboard.
Replies: 17
Views: 45747

Re: The twins are onboard.

P1020314.JPG IMG_0028.JPG The starboard Motor has a generator Jall. The box on that side is bigger but you can't see it in the pics. If you think it is a tight fit now picture this. Two gas tanks and a battery all tucked into that splash well too. :shock: Gas Tanks are going to go inside the boat t...