Stain over Mas Epoxies

Find paint matches and what others have used here.

Moderators: TDockside, Miles, a j r, Moderators

Stain over Mas Epoxies

Postby JALL » Wed Aug 17, 2011 1:27 pm

I have seen posts of stain use after using CPES on plywood with success. Has anyone used a stain on mahogany after coating it with Mas Epoxy or for that matter even before the use of Mas Epoxy. Thanks for any help or comments.
JALL
 
Posts: 113
Joined: Tue Aug 24, 2010 4:39 am
Location: WISCONSIN

Postby LancerBoy » Mon Aug 22, 2011 2:02 pm

Absolutely NO experience with MAS products. I have no clue if it can do what you desire.

Sorry.

Andreas
LancerBoy
 
Posts: 1414
Joined: Mon Jan 28, 2008 3:47 am
Location: Minneapolis

Postby Phill Blank » Mon Aug 22, 2011 9:05 pm

JALL,

I just looked over the MAS site and from what I am seeing their materials are basically the same as West System and other epoxy resin products.

These products are not the same as the Smith's CPES product. CPES is designed to penitrate into the wood fibers themselves and seal the wood. See Smith Company site at www.smithandcompany.org/CPES/index.html

From what I saw, MAS is a epoxy coating that sits on top of the wood and bonds to the wood fibers on the surface.

I would think if this is what you are thinking about using then you will have to stain before applying the epoxy.

Good Luck,

Phill[/i]
Image
Phill Blank
 
Posts: 412
Joined: Thu Jan 05, 2006 4:20 pm
Location: Hurley, Wisconsin


Return to Thompson Paints, finishes, colors, tips.

Who is online

Users browsing this forum: No registered users and 2 guests

cron