order of assembly?

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: a j r, TDockside, Miles, Moderators

Post Reply
andre lafrance
Posts: 102
Joined: Mon Sep 05, 2011 3:17 pm
Location: battle creek, michiganretired

order of assembly?

Post by andre lafrance »

getting ready to temporarily assemble parts of my '57 15' sea coaster. in what order do the inner keel, garboard, and outer keel go together? anything I should keep in mind as I assemble these parts? tricks of the trade, etc. thanks as always...

p.s. answered my last restoration question (fyi): the inner keel/stem assembly butts up to number 8 frame (counting from the stem). then, the inner keel passes over number 8 and is scarfed to the inner keel/stem. also, starting under the front seat, the inner keel begins to taper in order to meet the inner keel/stem assembly which is narrower. frames 1 through 7 are notched into the inner keel/stem assembly which is a good thing because the bend at that point would be impossible to make given the configuration of the boat at that point. all have an enjoyable thanksgiving. I know I'm thankful for this site :)
Post Reply