Twist removal

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: a j r, TDockside, Miles, Moderators

Post Reply
Busted Knuckles
Posts: 9
Joined: Wed May 10, 2006 4:11 am
Location: Port St Lucie

Twist removal

Post by Busted Knuckles »

I have removed the decks from the boat , and now notice a twist to the stbd side . The stbd is about an inch or less than the port rail . I thought that if i evened it out while installing the new deck that it would straighten out . Doing this worked somewhat but there is still a 1/8 to 1/4 difference port to stbd . I have removed all of the decks on the coveringboards and was going to raise the twist out of it as I install new coveringboards, hoping that this will work . any ideas , am I doing this right?
What you have is an affinity for the useless!Image
Post Reply