Wood Stain for my C202

rusty · Post by **rusty** » Wed Jul 08, 2009 8:35 am

Hello all.
I am in the process of restoring some Cruisers Inc emblems. I have sent the metal to be re-chromed and I am repairing the original plywood backing. They are in pretty good condition, especially one of them. The other needs a little filling after sanding. Luckily, the worst part to be restored is on the reverse side.
I am having difficulty in finding a matching stain to match the boat. Does anyone know what stain was used on a 1961 C202? On test pieces it all looks too dark, more of an Oak colour rather than a rich 'honey'.
Any help will be much appreciated.
Happy boating.

LancerBoy · Post by **LancerBoy** » Fri Jul 10, 2009 3:17 am

Have you tried Z-Spar Standard Mahogany?

Andreas

rusty · Post by **rusty** » Fri Jul 10, 2009 7:07 am

Hello Andreas.
I have not tried this stain but will now.
I have been looking online to get some but am coming up short. Where have you been getting yours?

rusty · Post by **rusty** » Fri Jul 10, 2009 7:18 am

Just found it at Jamestown with the brushing thinner.
Many thanks for your advice.

Phill Blank · Post by **Phill Blank** » Sat Jul 11, 2009 4:43 am

Rusty,

You should be able to get the Z-Spar filler stains at a West Marine Store in your area or any other Marine supply store.

Good Luck,

Phill